BackwoodsCanadian
New Member
Hey guys, I'm new to the forum and even Sea-Doos. I was just given a 1995 Sea-Doo GTX a weeks ago that hasn't ran in a few years as a thank you for repairing an ATV. I drained the old injection oil and fuel then replaced the oil filter, fuel filter, and spark plugs. I then put a tiny bit of oil down the spark plug holes and filled it with new gas and Bombardier synthetic oil. I didn't have a battery for it and I didn't know it was going to run so I decided to use my small booster pack instead, until I knew if it was going to run or not. It started up and ran great, but when I shut it off and went to go start it again there was no response from the start button. I read around and seen that I shouldn't have boosted it (in hindsight I should've researched that before). What should I check and do to get it running again. Thank you guys in advance.