1994 xp 650 seadoo elect. problem

[dudelove]

my seadoo just died in the water.nothing works... have new battery,nothing changed..can turn motor over by crossing contacts on selenoid but no spark.
all switches are working properly..

 

[Bills86e]

Open the E-box and check the fuses and if any loose connectors. Magnito plug
may have come loose or you have water damage in the Magnito Stator/flywheel
assembly. You can test that M-plug with a light testor to see is you have a pulse before you pull it apart. Bills86e

 

[dudelove]

opened wire box and 5amp was blown.. replaced it and as i did it blew also..checked all wiring connections. they seem ok.. put in another 5amp fuse now it is ok..i have 5 wires coming out of stator ....Yellow to rectifier..White splits to MPEM and CDI box....Red with black stripe to CDI box...Yellow with black stripe splits. to rectifier and gauges..Black to ground(these are all bullet plug ins) how would i test stator...