14’ GTX 260 gauge bench test question pin battery

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.
Hey guys. Finally joined the Seadoo forum. I’m on many other forums tho
2014 GTX limited IS 260 I picked up. Needs a motor and wire harness.
my question is who knows what pins on the gauge will let me bench test the cluster just to powerup? I’ve done this on a few other 180 challengers in the past. Should be a + pin and - pin connected to power would make it light up.
Any ideas?

9D048B5E-7F92-44B2-B894-A2185964E01C.jpeg
 

Attachments

  • 22402785-1549-48FC-B89C-BF319AB3CF05.jpeg
    22402785-1549-48FC-B89C-BF319AB3CF05.jpeg
    2.8 MB · Views: 9
Part number on gauge is 278003380
Actually to seadoopartswharehouse.com

yet the sticker on back is 278003185
 
Last edited:
Looks exactly the same as the rear of my GTX 155 cluster, in which case top right pin is 12V + and bottom right pin is negative. That will provide power to the unit, but unsure if it'll light up - as you'd need to hook up the on/start button too it as well - unsure what pins these are.
 
Last edited:
Status
Not open for further replies.
Back
Top