• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Xp limited 951 vts help

Status
Not open for further replies.

Ace875

New Member
Hey all,
I've got an XP Limited 951 with a non working vts. Based on what I read online i figured it would be an easy fix with either the solenoid or the motor being the problem. After going through a bunch of trial and error I can't get it to work. The new motor works on the battery and I hear clicks from the solonoid when I hit the buttons. I also flipped the wires to the motor about 5 times. From a multimeter I'm reading about 4-6v at the trim wires when I hit the vts buttons which seems odd to me. Is this low voltage the issue? Any other ideas?
 
Last edited:
Get rid of it. It’s the electronics in the housing that go bad and are known to fry the expensive MPEM. Contact Westside Powersports Seadoo for a guaranteed tested used one.
 
Status
Not open for further replies.
Back
Top