• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

What is this part called?

Status
Not open for further replies.

hasan

New Member
Hey guys wondering what the part is called that is circled in red. broke it and i want to replace it. thanks
 

Attachments

  • sea-dooGTISE130_rideplate.jpg
    sea-dooGTISE130_rideplate.jpg
    34.5 KB · Views: 43
I believe you have the FLUSH PORT circled.

It is normally opened. On used for flushing the engine. No plug goes in it when running on the water.

How did you break it?
 
when flushing my engine my hose adapter got stuck to the flush port. the male and female stuck together and the flush port came out. when putting it back in i was tightening it with my metal rathchet. since the flush port is plastic i got molded into a circle now. dumb move on my part
 
Top of the page under PWC parts. It is a sandwich fit. Meaning there is a large nut on the inside. Not normally easy to get to. Make sure you use a quality sealant. I like black RTV as it is good for oil and water.
 
Top of the page under PWC parts. It is a sandwich fit. Meaning there is a large nut on the inside. Not normally easy to get to. Make sure you use a quality sealant. I like black RTV as it is good for oil and water.

thanks so much lastly would you happen to know which catergory i can find the part in
 
Top of the page under PWC parts. It is a sandwich fit. Meaning there is a large nut on the inside. Not normally easy to get to. Make sure you use a quality sealant. I like black RTV as it is good for oil and water.

nevermind i found it thanks very much
 
Status
Not open for further replies.
Back
Top