I have a 2011 Seadoo GTI SE 130 that I will be winterizing soon. I was also thinking about doing the wear ring as well since there is scoring around the sides. May even replace with a solas impeller. Anyways, with the wear ring change, you take the jet pump out to get to it:
(a) Do most of you put the jet pump in the freezer to make it easier to get the wear ring out?
(b)And do you use a specific bracket or brace on the driveshaft while you have the jet pump off the ski? Or is it ok not to use a bracket on the driveshaft?
Thanks!
(a) Do most of you put the jet pump in the freezer to make it easier to get the wear ring out?
(b)And do you use a specific bracket or brace on the driveshaft while you have the jet pump off the ski? Or is it ok not to use a bracket on the driveshaft?
Thanks!