• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Water won't pump out of hull

Status
Not open for further replies.
Check to see if the bailers (on either side of the drive shaft) are free of debris.

Chester
 
Check to see if the bailers (on either side of the drive shaft) are free of debris.

Chester

Chester, ive kinda got a similar problem, are the bailers the small plastic pieces (aprox 2"x2") on the bottom of the hull in the (2) trench like area in the bottom of the hull? If so, there is small metal brackets, almost like a Hold-down, on each one, holding it face down in the hull. i was cleaning my engine bay yesterday and noticed the pop rivets that hold the one side of the clip down are both corroded off. Any suggestions?
 
Status
Not open for further replies.
Back
Top