Trying to test gauges and re-wire

[cstrainsgun]

Does anyone know how to get to the back of the gauges without completely destroying the dash?:ack: I have 4 screws at the bottom of the dash insert (gray piece with all gauge holes), once those are removed I can get the front up but it looks like there is a bolt in the back holding it down. I see two hex bolts below the dash above where your feet would be? Any help would be great. Depth finder stopped working as well as my speedometer and think it is just lose wiring but cant get to it.

Cheers! :cheers:

 

[rookie101]

Remove the seat back in the bow section and you will find the access hole you need. Then feel up underneath the front of the dash panel and you will feel a nut with a large washer, remove it and the whole panel will lift up enough for you to undo the electrical connectors and remove the instrument panel. Use a mirror if you have to, to have a look under the panel from the access hole so you know where you need to feel for the nut.

I also remove the two lower screws for the windshield brace and then fold the brace back. This gives you lots of room to remove the instrument panel.

Aaron:cheers:

 

[cstrainsgun]

Thanks!

Appreciate it Aaron! That made life a whole lot easier!

:cheers: