• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Top down, anyone?

Status
Not open for further replies.
I think you can get them at any boat store or Ebay. You just need the measurements of your boat and they will let you know what you need.
 
Save yourself a BUTT load of $$$ and DON’T buy a factory top. All you need is a top that is around 80” wide, and some side mounts. (they normaly come with top mounts) I got the top on my boat on eBay for $120 shipped, and the plastic side mounts were $7 at the local boat shop.

Mine is 42” tall… the factory top is much shorter… but it’s a pain to walk under when they are that short. The taller top makes getting in and out much easier.

Good luck:cheers:

172.jpg



80.jpg
 
I got mine at overtons, and installed it the same way Dr Honda's is. Works great and I agree that a taller one is better just so you can move around.
 
thats a nice top i want one for my speedster so i only need to look for one 80" wide? and side mounts. is the speedster wider than a sportster?
 
Status
Not open for further replies.
Back
Top