Tool list help please.

[shucky]

Replacing carbon seal on my gti 155 Se and not sure exactly what tools are needed. If anyone could help me out once again? keeping in mind there was a couple parts changed between the 08 and 09 models, the 08s look as if its a long straight shaft at the carbon seal boot, My 09 model has a largish nut at the boot.
Cheers.


Sent from my dead seadoo using tapatalk

 

[shucky]

all sorted now, maybe this will help someone else, seadoo must've done what they call a running change over in the production of the 09 and 10 4tecs in this manual it shows what they are calling 09 -10 SEA DOO PWC SUPPLIMENT which can be found starting on page 593, which is showing the drive shaft with the a large nut on it.
Seems from years 08- 13 the assembly is all the same thus skipping years 09 and 10 when they used this nut on the shafts, sometime during or after 2010 seadoo went back to the original setup, have a look and compare the pictures you'll see what I'm explaining.
the first pic is the supplement as they called it the second one is the assembly they used prior.