The cluster gauge won’t power on

[easef1993]

Hello fellow Seadoo owners!
I need some help.
I have a Wake155 (2014), and cluster gauge won’t power on.
The gauge failed after it got water inside when the capsized, so I bought a new one.
However, nothing shows on the LCD, and the scan tool can’t communicate with the gauge.
I even borrowed another gauge from the shop to test, but it had the same result.

Could this be caused by a fuse?
If so, which fuse should I check?
Also, if there are other possible causes I should look into besides the fuse, please let me know.

Thanks for your help!

 

[ski-d00]

Cluster should power on when you press the start button without the key on. Replace your 30A relay if i it doesn't. The cluster will need to be married to your ECU with BUDS for it to run.

 

[Boater59]

As with all things (cars, boats, doo’s etc) simple things first. Check ALL your fuses since there’s just a few. Check their condition as well i.e. corroded, crusty and this includes all the harness connectors to the gauge set. Then move on from there.