1996 SPI after doing some work I wanted to test the sensor. As the sensor heated up the ohms came down but not much. I never got the circuit to close. So naturally, I put a torch on it to see what happened. Still didn't close. I'm sure I got it over 200 degrees. 
The water test was with the water at about 218 degrees and I didn't get a reading.
I was expecting a reading of Zero Ohms at over temp. I just want to confirm that the sensor is bad. Anyone have a good one for saie ?
The water test was with the water at about 218 degrees and I didn't get a reading.I was expecting a reading of Zero Ohms at over temp. I just want to confirm that the sensor is bad. Anyone have a good one for saie ?
