Starter Problems

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

onelongwave

New Member
Starter makes a running sound but I do not hear it click to engage .! I gave it a tap but sounds the same ??? Any one out there with a Idea!!
 
Starter Problems

Yes I just read some of the other Threads and I would say thats it . I hope it is easyer to pull the starter than it looks .
 
I have a starter engaging the flywheel, but then it seizes up and smokes. It will not turn anymore.Battery shows full charge.

2003 X-20 EFI 240 Mercury. Is this a bad Silinoid or starter?


RivRat
 
Sounds like a good opportunity for a new thread, but thats all right...

Welcome to the forum!
It could be the starter motor, solenoid sounds fine.
Can the motor be turned by hand? On the rotax motors you can just grab the PTO flywheel with the spark plugs out and turn it by hand, with the mercury you might need to attach a wrench to somewhere, but do it with the plugs out anyways...
 
Status
Not open for further replies.
Back
Top