Phildoo New Member Jul 27, 2011 #1 Does the rave need to be shaved with the bevel or can it shaved bluntly on the edge?
Dr Honda Well-Known Member Jul 28, 2011 #2 Needs the bevel. The RAVE's sit at an angle to the piston, and it needs the bevel to seal (or block) the port properly. If you shave it square to it's own side... it won't effectively be moving the port.
Needs the bevel. The RAVE's sit at an angle to the piston, and it needs the bevel to seal (or block) the port properly. If you shave it square to it's own side... it won't effectively be moving the port.
