murraysean960
New Member
I have 2 2014 Sea Doo GTI 155 Limited. They recently had an oil change and they put too much oil into each ski. This caused the SKIS to produce white smoke and would not allow for full acceleration. I have since reduced the amount of oil to the required amount and one ski is working as if new and the other still will not accelerate. The Second Ski runs to 35 mph and no higher. It i running at around 5000-5400 RPMs when at that speed and is not producing any smoke. Both skis ran perfectly fine before the oil change. THANK YOU!
I am getting error code P0524
UPDATE: The error code has cleared. The Ski now goes up to 35 mph (again) and 5400rpm when in the water. When the ski is on the lift and plugged into a hose, I can get all the way up to 7500rpm. Why won't it accelerate faster than 35mph and it seems to be cavitating lightly?
I am getting error code P0524
UPDATE: The error code has cleared. The Ski now goes up to 35 mph (again) and 5400rpm when in the water. When the ski is on the lift and plugged into a hose, I can get all the way up to 7500rpm. Why won't it accelerate faster than 35mph and it seems to be cavitating lightly?
Last edited: