I am just trying to figure out if having an mpem with DESS wire and not DESS post/key could cause a starting issue.
I am loosing my mind trying to figure out the starting issue.
Wouldnt turn over so jumped solenoid, it turned over fine, replaced solenoid, same problem, tried 2 other solenoids, same problem, replaced starter, same problem. Checked and cleaned battery cables, cleaned grounds in control box. Added extra grounds to rule that out.
There are only 3 ways I can make it turn over like it is supposed to:
1. Jump solenoid
2. Put 12v to yellow wire going to solenoid
3. Touch lead going into coil with test light that is hooked to ground