Question about 852962T alum inlet grate
Hi
I ordered a new grate to replace hydrosurge
as recomm on this board.
I just received it from marinepartsplus.cm
the box says quicksilver parts. But the actual part is stamped c
C not T.
The overall finish is like a rough texture Black paint.
The individual ribs are not all uniform looking. One of the tines
3 in from side has a larger lip that sticks up quarter inch higher than
the other tines. Overall it looks like bad handmade.
Please let me know if this is how they are or if I have a bad Chinese copy
I will try to get a photo up later
thanks on advance
Andy
Hi
I ordered a new grate to replace hydrosurge
as recomm on this board.
I just received it from marinepartsplus.cm
the box says quicksilver parts. But the actual part is stamped c
C not T.
The overall finish is like a rough texture Black paint.
The individual ribs are not all uniform looking. One of the tines
3 in from side has a larger lip that sticks up quarter inch higher than
the other tines. Overall it looks like bad handmade.
Please let me know if this is how they are or if I have a bad Chinese copy
I will try to get a photo up later
thanks on advance
Andy
Last edited by a moderator: