problem with my seadoo

[viswaamitra2001]

my seadoo is an xp 800 1995 engine type 787 the prob i am having is i am getting current out of the flywheel but not passing tru the power pack to power the coil so the engine is turning over but not getting current to tne coil

 

[nswillin]

I think what your saying is you are not getting any spark to the plugs. Could be your coil or bad wires. Try this test with a mutimeter.

1. Remove the 1 female spade connector from the
primary side of the ignition coil.
2. With the multimeter set on the resistance scale,
connect the meter probes to the primary terminals
of the coil.
3. Resistance should be between 0.29 - 0.39 ohm.

 

[viswaamitra2001]

problem

i bought a new mpem and a coil but when i put on the mpem the engine not turning over with the old mpem and the new coil the engine is turning over but no current

 

[viswaamitra2001]

i change the dc-cdi

i have also changed the dc-cdi but with the new parts the engine is not turning over the person that i bought these stuff from now telling me i need to get the lanyar program with the mpem and the dc-cdi before it works