• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

oil in the cone of the jet

Status
Not open for further replies.

BobR

Member
I've noticed that on YouTube some people suggest putting oil in the cone of the jet for the propulsion instead of Greece because of the fact that it spins out into the cone I was wondering I don't see a screw in my cone to put oil in are they drilling and tapping for their own screw to go into the cone and also is it a better idea to use the synthetic gear oil rather than the grease.
 
Use what Seadoo recommends. If they say use grease then use grease. Don't go by what someone on YouTube says.
 
Didn't BRP originally say to use oil but later changed to grease because of some failures due to oil?
 
Status
Not open for further replies.
Back
Top