Oil Filter Cap O-ring Blows Out...

[devonte007]

If you have excessive oil pressure at the filter can then I would think it may have something to do with one of the oil pumps or maybe a blocked oil passage or blow-by. Crank case pressure related to the TOPS is a different issue than actual oil pressure at the oil filter. I am not an expert on how the oiling system works in these engines but I did find this thread was particularly interesting, there is also a link to a great youtube video that explains how the oil system works in these engines. It should help you track down the cause of this problem:

http://www.seadooforum.com/showthread.php?71182-P0524-limp-mode-oil-pump&highlight=crushed+oil+filter

 

[Duane72]

I figured out the oil filter leak issue... but have found excessive oil pressure. I started under a new thread so I can clean up the side roads on the filter leak. http://www.seadooforum.com/showthread.php?71636-02-GTX-Limited-4-Tec-high-oil-pressure

 

[red2blue]

I figured out the oil filter leak issue...

.........

Some bonehead (might have been me ) put the oil filter cap orings in backwards.

:thumbsup: