I have 2001 GTI. When I connect the lanyard to the terminal all the electrical systems start to work and the ski starts fine but the buzzer never sounds. I thought that as soon as you install the lanyard you should hear two short beeps. Does anyone know how I could go about trouble shooting this problem? The buzzer is located in the handle bars, but I think that it wouldn't be to hard to get to. Is it possible that the buzzer itseld just needs to be replaced? Any suggestions would be appreciated.
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
No Buzzer Sound. Need Help Troubleshooting
- Thread starter slemon428
- Start date
- Status
If you can locate it see if you can fell it vibrate when the lanyard is attached. It sounds like it is just a ban buzzer. You really need to replace it as it also beeps if the engine over heats as a warning. You could get on on our "PARTS" site if yours is bad.
Karl
Karl
Thanks for the reply. I took the buzzer out of the stearing column and I did not hear or feel any vibration when I connected the lanyard. I am not sure if it is the buzzer itself or if it isn't getting the signal to buzz. I went ahead and ordered a new buzzer assembly from Seadoo warehouse. Hopefully this will resolve the issue. Is it very common for a buzzer to just stop working?
It's kinda like flip a coin...some members never have to replace them and I hear some do... It isn't a usual problem, but it does happen.
Karl
Karl
- Status
Similar threads
