New to me 96

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

TheMachin0

DOO OR DIE
Premium Member
Have been out of the game for a couple seasons busy with the new cottage but I rescued this old race ski today guy said it just needs a starter which I have a couple so will see see what happens
9f7195be3213df8cf94d5c0a4c57cb12.jpg
ec13b58c15f56f6b40b33346f67e17e6.jpg
c67841a2b0c8989859d1cebabbff0fe2.jpg
bb09d8c75b4affe297ee8fa80dc356fc.jpg
b4520397e56734f31a09c4912d7033c4.jpg
f2f324398604a8eb3d182ab060d010b1.jpg
 
Ya I've been looking for a lot of the parts on it because I'm to cheap worked out I guess. The starter wasn't its problem bad piston thankfully I have a couple

Anyone have a reason i shouldnt run a .5 over with a .25 piston will it hurt the crank if I put a diff size piston in it I also have a good standard size one
 
Not really sure how this umi comes apart from this point I've never had one. Should I pound the center in pry the plate?
f3303afd56b7fb0ded3374f8d39c49d7.jpg
321f4d45c4ce29a84d251569d79d872c.jpg
 
You will need a puller just like the stock one. You can see the external threads where the puller screws onto.
 
You need the puller like the factory. It's the only way to fly, that's why the outer part of teh hub is threaded. Best place to pull from.
 
I ordered a puller now the waiting game. most of the parts are for sale or trade if you really want some of them. The wizzy ring gear is trash most of the teeth are half chewed from the cheap starter that was on it so it's just cool wall art now
 
Runs great still a bit of water jeting and a little fine tuning on the carbs but kinda blown away at how good all the setups working
 
Status
Not open for further replies.
Back
Top