need help on a 2005 jet pump

[wiscoriver]

Hello!
Just bought my first 3D today. It a 2005 Premium w/11 hours. Can't wait to get it on the water. I want to change the jet pump oil before taking it out. Can anyone show me a thread with a how to on this topic? thanks for your time!

 

[MYChina]

I am pretty sure that there is no oil involved with the jet pump. the only oil you need to put in is two stroke for the motor. other than that the occasional grease (only very small pump) into the shaft seal.

 

[1MACGYVER]

theres oil in the bearing housing in the cone in the centre of the pump
Very Basicly:
-remove the steering nozzle
-remove the venturi
-three bolts take the cone off and the oil will come out clean it out
-replace the cone (careful with the o-ring)
-theres a allan key plug in the side, take it out and fill with jet pump oil

try to download the '2005_SeaDoo_ShopManual.pdf' its in detail with all of the torques and hints

 

[wiscoriver]

Thanks! Is there a free service manual for 2005?..

 

[wiscoriver]

Or can somone tell me exactly how much oil to add?

 

[MYChina]

well I'll be dammed. learn something everyday. sorry for pointing in wrong direction my bad.

 

[1MACGYVER]

once you re attach the cone the fill level is up to the bottom of the fill hole so just keep adding until it leaks back out
the manual is the propper workshop manual in pdf format, if you search you will find it for free google: 2005_SeaDoo_ShopManual.pdf