good day all, picked up a 2017 Spark last week, first time in water seems to run OK, no issues with speed shows 40mph and quite smooth, initially when powered up it says maintenance required, the machine has 110 hrs, is this for service oil change? any way to clear it?
other issue we ran it with a plug in the flush hole, could this cause water in the hull or any issues?, we did roll it over in the water and after righting we had water, lots of water anyway going out again on the weekend and see if water gets in when not rolled over.
other issue we ran it with a plug in the flush hole, could this cause water in the hull or any issues?, we did roll it over in the water and after righting we had water, lots of water anyway going out again on the weekend and see if water gets in when not rolled over.