Key problem rental

[piweit]

Hello,

I have a GTS 130 2014. For some time, with the rental key, I can activate the "sport" mode. Normally this is not possible with the rental key. When I connect the computer to the jet ski, there is no error. I delete and add a rental key and even problem. Do you know where this may come from?
The jet ski at 640 H.

thank you in advance

Gauthier

 

[ski-d00]

Do you have BUDS or CanDoo? When programming, are you writing it to the ECU before you exit? Does it say rental on the lcd when you put the key on? Does it still let it go into sport after this? Does it actually go fast or does it just say sport mode?

Sounds like an ECU issue but I've never seen this issue but I rarely ever deal with rental machines.

 

[piweit]

Do you have BUDS or CanDoo? When programming, are you writing it to the ECU before you exit? Does it say rental on the lcd when you put the key on? Does it still let it go into sport after this? Does it actually go fast or does it just say sport mode?

Sounds like an ECU issue but I've never seen this issue but I rarely ever deal with rental machines.

I have BUDS. Before leaving the BUDS, it is well written that the key is rented. No it is not noted on the screen of the PWC.
* The sport mode is activated, appears on the screen and the speed is also in sport. I also think has an ECU problem but the PWC is not very old ...

 

[ski-d00]

If it does not say RENTAL KEY when you put the key on, what does it say? It should either say NORMAL KEY or LEARNING KEY then. You can set the speed level of the learners or rental key on the machine itself not using BUDS, check the operators manual for instructions.

In BUDS, try erasing all keys and then writing to the ECU. Then program the rental key as the only key. Then see if that key is recognized as a rental when you put it on. Rental keys can still be programmed to go pretty fast, like 50 similar to the learner key which has adjustable levels, level one is like 32mph and level 5 is like 50mph.

 

[piweit]

If it does not say RENTAL KEY when you put the key on, what does it say? It should either say NORMAL KEY or LEARNING KEY then. You can set the speed level of the learners or rental key on the machine itself not using BUDS, check the operators manual for instructions.

In BUDS, try erasing all keys and then writing to the ECU. Then program the rental key as the only key. Then see if that key is recognized as a rental when you put it on. Rental keys can still be programmed to go pretty fast, like 50 similar to the learner key which has adjustable levels, level one is like 32mph and level 5 is like 50mph.

Yes, it is well written key rental has the screen pwc. On this model of PWC (gts) I can not change the levels of the keys, no button "mode", "set". I'll try to erase all the keys. thank you

 

[piweit]

I deleted all the keys and programmed just one in rental, always possible to put the "sport". I programmed one in "learning", impossible to put "sport", it works well.