Just clicking when starting both engines -- 1996 Speedster

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

Moog62

New Member
I went out today, installed both batteries after they had been on the charger for some time. The front battery worked fine when testing fan and bilge pump.
I tried starting left engine and just got a chattering or clicking. I tried starting the right engine and all I got was chattering or clicking as well. I was actually encouraged by the identical behavior. I am guessing that I need a new second battery. Seems unlikely that both solenoids and/or starters would go at the same time ;-)

Does it sound like I am on the right track? I had to walk away for today. Tomorrow morning I was thinking of just trying to jump the second battery.

The good news is that I fixed the problem with it no auto bilge ;-)

Many Thanks in Advance.
 
chase the red/black cables for any breakage/corrosion, if all good, then jump the relay. If it turns the motors, then i say replace the realys..
 
Status
Not open for further replies.
Back
Top