muskokamarc
Active Member
Hi guys, so I’m in the middle of trying to extract the oil from my seadoo, and it’s taking very long, almost one hour for one litre... I attached two tubes one thicker than the other, (taped them together with electrical tape as the one wasn’t long enough) in order to reach the bottom. The skinny one seems like it’s draining fine, but the thicker one is not a constant stream but very slowly trickling out (sort of like sucking on a straw at the end of a soda with ice...). I can’t figure out why it’s doing this! Any suggestions?
I started the seadoo for 30secs before doing all this, but it didn’t really help. Also, how long can I run my seadoo without attaching a water hose?
Thanks.
I attached photos of the pump I bought.
I started the seadoo for 30secs before doing all this, but it didn’t really help. Also, how long can I run my seadoo without attaching a water hose?
Thanks.
I attached photos of the pump I bought.
Attachments
Last edited: