• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

how do u hook up mpem

Status
Not open for further replies.

dylan1323

New Member
im replaceing my 95 gtx mpem(278000423). ive donr trued to hook it up but i hooked it up wrong. all it would do when i tired to start it was click alot. so im hoping someone here can give me the link to a diagram or tell me how to hook it up. please help
 
I'm pretty sure you have the older style MPEM, no multi connectors, basically the wires are color coded, just disconnect the wires and connect the new MPEM, are you sure the new MPEM functions. There is a wiring diagram in the service manual.

From what you are saying it sounds like you have a weak battery.

Lou
 
Does your solenoid have terminals? I thought a 95GTX the wiring harness just plugs into the base of the solenoid. If it's got terminals then you probably should download a service manual, it has a wiring diagram.

The top of the solenoid the two large terminals, one side goes to the battery the other to the starter.

Lou
 
yes it has termiinals. which terminal does the starter go on and which side for the battery or does it even matter which side. and the the mmpem is suppose to hook up to the solenoid i think . it has a red and a black wire that goes on the solenoid which color goes on the battery side, and which color goes on the starter.
 
The two large terminals on the top one goes to the battery, one to the starter, doesn't matter which one. I'm not sure about the other terminals, and I wouldn't want to give you wrong information as it could be catastrophic, I think you should download and service manual and check the wiring diagram. I'm not sure but I'm thinking someone has replaced the factory solenoid with a generic, post a picture.

Lou
 
Status
Not open for further replies.
Back
Top