GTI SE, GTX steering cable through hull pic needed

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

pwcmaster_b

New Member
I'm having trouble with my steering cable adjustment (can't get the nozzle to go fully left), and I think the issue may be tied to not having the cable pushed far enough through the hull. Yes, I've worked on the adjustment nut and I have it backed out as far as it can go and still not enough for left turns. Also the ball joint ends are both at 5-6 turns to meet the minimum requirement. Here's what my steering cable looks like from inside the hull. I think less of the stainless needs to be showing for the proper throw. If someone with a 4TEC GTI SE or GTX can provide a picture of their cable as it comes through the back the hull, that would be appreciated. Thanks!

IMG_3563.jpg
 
Status
Not open for further replies.
Back
Top