GregM64
Member
Ok, not drawing fuel from from tank, I removed tank line from inlet on carb(s) & connected clear hose to the inlet & then connected that to a bottle of fuel, which it did start drawing fuel up the hose a little bit, but then I would have to raise the bottle to help gravity feed it & she fired up & it ran like a champ. Then I attach a clear hose to the filter that would go to the inlet on the carb(s) & was able to pull fuel up from tank to the filter no problem. So, no I have not checked the pulse line for any cuts or holes but I will right after I send this. On that note, the pulse line from crank case, if I blow or draw air thru the line should I expect free flowing either way???
And Yes, it has good compression in both cylinders & all the lines have been replaced when I put a new engine in, back in 2018. Needing some help.
And Yes, it has good compression in both cylinders & all the lines have been replaced when I put a new engine in, back in 2018. Needing some help.