• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Fuel Delivery Problems

Status
Not open for further replies.

Shells Bells

New Member
I have the carb off...

1.) I cleaned the fuel filters in the carbs (they were a little green, but not really too bad, although I do not know what "bad" is) Anyways, they are CLEAN now...

2.) I have the fuel selector valve off, and sprayed them pretty good with carb cleaner (a bit of green goo came out)...

3.) I replaced the grey lines with black lines

4.)ANYTHING ELSE that I can do (while I have the carb off)?

THANK YOU AHEAD OF TIME....
 
As long as the gaskets, seals and such are good Id say your on the right track. Nice work on ditching the fuel lines. Dont forget about the little fuel filters in the carbs. Might be a good time to clean the fuel selector valve?
 
If you replaced the needle assy or spring do a pop off pressure test! If you didn't replace don't worry about it!

I'd say you've done all that needs to be done as far as the fuel system goes!

If you haven't cleaned the RAVE valves, I'd do so before u hit the water!
 
Status
Not open for further replies.
Back
Top