Exhaust overheat

Status
Not open for further replies.

Njudice

Active Member
I’m having trouble with my sea doo wake pro exhaust overheating and I’ve flushed the hoses and checked everything I could think of. As soon as I start it it won’t move and it over heats in less than a minute. Although it runs fine if I have a hose connected to it. Does anyone have an idea what might be the cause? I was told it could be the impeller and wear ring but they don’t look that bad
 
On the left side of the pump at the top there is a screen , it looks like a large plastic nut and you can take it out and clean it. Look it up on the parts list at the top of this website page for a description and a general idea of where it is.
 
On the left side of the pump at the top there is a screen , it looks like a large plastic nut and you can take it out and clean it. Look it up on the parts list at the top of this website page for a description and a general idea of where it is.
Is this what you talking about?
 

Attachments

  • BF298CE7-DFD1-4E24-AC64-33FF56AD7E4B.png
    BF298CE7-DFD1-4E24-AC64-33FF56AD7E4B.png
    9.2 MB · Views: 28
Status
Not open for further replies.
Back
Top