• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

elevation and carb settings for 720's

Status
Not open for further replies.

seadoobie

New Member
So I recently moved to Colorado and wanted to know what I would need to do to my carbs before running them at a higher elevation? I am at around 6000-7000 ft now. Its a lil eirly in the season still, but if i need to work on it now, it would be the time for me. Any advice or help is appreciated!
 
Last edited by a moderator:
Wellllll.......................


I wouldn't instantly try to re-jet the carbs. Since you have less air, you will make less power. Seadoo's "high Altitude" kit is actually an impeller with about 1 degree less pitch. This allows the engine to rev up a little better, and gets your top speed back up. Also... since you have less air to compress... raising the compression will give you a big gain. The only draw back is if you do that... you may need high octane fuel if you go back down to sea level.
 
Status
Not open for further replies.
Back
Top