M me757 New Member May 20, 2018 #1 Replacing carbon seal, when putting back together the stainless hat won’t move down the shaft toward the pump. How do I get the stainless hat down
Replacing carbon seal, when putting back together the stainless hat won’t move down the shaft toward the pump. How do I get the stainless hat down
mikidymac Moderator Staff member Moderator May 20, 2018 #2 Make sure the 2 o-rings are completely seated in the hat grooves and are greased with seadoo XPS grease. There is absolutely nothing else that will hold it up.
Make sure the 2 o-rings are completely seated in the hat grooves and are greased with seadoo XPS grease. There is absolutely nothing else that will hold it up.
M me757 New Member May 21, 2018 #3 I tear it back down and check, it was pushing against the pto cover.
M me757 New Member May 21, 2018 #4 Thanks tried again today, cleaned and regreased, went on no problems.