does THIS have THIS P/N????????????

[daverade]

does ANYONE have THIS P/N????????????

i need the part # for the grommet that goes in the top of the oil tank around the oil sensor...i cant find it on anybody's micro oro. and i went to sea doo doucher told me i gotta buy the whole sensor $90, get off me!!! mine is so worn and old on both ski's that oil is just splashin outta there making a big mess and costing ME lot's of loot...i would rather burn it....so please if you work at a shop or know the # will you get it to me...if you own a shop i will buy it from you, i gotta pay shipping at my local dealer anyways, thank you all for your time reading this, and hopefully responding!!! i'm out.......and oh yea it's NOT the same grommet that goes on the bottom, i bought 4 of those thinking it was; grommet #23, so...now i got 2 extra bottom tank grommet's!

 

[seadooya]

i would of paid the 90 buks......

Gotta support our local seadoo stealers.

 

[daverade]

get tha fwack outta here, thats 2 gallons of oil (gettin ripped) and 1/2 a gal would of spilled out....lol

 

[Dennis]

I could of swore it was the same as the grommet on the bottom. Are you sure the bottom grommet won't work? Look for a part number on the worn grommet.

DAWG

 

[awd98tsi]

I had to get one for my 96 spx, it's a really thin grommet that goes around the oil sensor. It was about $5 if that's the same thing you are talking about. I got it from RTsales.org Again, not sure if it's the same for your year or not.

 

[Bills86e]

cheap azz zay makem

Thats assembly IS 90 X 2 + tax = $194 for two ski parts. 278000478 item 7-10
http://partsfinder.onlinemicrofiche...oem/Seadoo_PWC.asp?Type=18&A=43&B=14&Action=O

 

[daverade]

i found the p/n boy's...it in fact is not the same as the one on the bottom, it is much thinner...i thought it was and ordered 4 of them now i have 2 extras...i did squeeze one around the sensor and crammed it a lil way in the tank...for now so atleast its not sloshin oil out........if you look at the micro for the 97 it shows what bills sayin you gotta buy everything, but still bill look at the parts 7-10...no grommet there i would have been pissed, the trick is look at a micro for a 1998 gtx ltd...same tank and they list the grommet...i called bombardier, and basicaly what i got from them was in previous years to 97 they did not realize they left it out so in 98 somebody noticed and added it to the diagran...same oil tank, same grommet....SKU: 204470104....for anybody else that needs it

 

[Bills86e]

Yup! Found out that they left out the venturi tubes in alot of ski's. And thats why
they won't suction all the water out. Can't find'm on the microfishe either. Later
in 2001 they added'm. Look up in the jet nozzel top of venturi for the two tubes
should protrude into the thrust water. Glad ya found it!

 

[daverade]

thanks bill, im kinda lost to the venturi tubes...i think i know what your talkin bout but not sure, i do know with water in my hull, the bailers dont get the majority out.....their is 2 tubes from the bailers that go up to an elbow (thats ziptied to the top of the hull, then routed to the pump area??? and when i did my pump service, the lil o-rings were good, and i put a little swipe of silicone on them as well as the cone???

 

[Bills86e]

Dave, if you look in the nozzel, they would look like "tiger Tusks". On pump exterior
top, you can see the water vein ridges. Look at a 2001 GS venturi on the microfishe.

 

[daverade]

Ooooohhh ok i see ya now... Luckly mine are still intact... Thanks for the break down

 

[Bills86e]

You betcha. Without them you keep water in there, an everything gets moist if not
protected by grease. Venturi pressure can even backdraft. Bills86e