• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Do I need to replace this impeller and wear ring?

Status
Not open for further replies.

hasa0005

New Member
8A362040-C08B-4B78-8407-5A1CABCBACF3.jpeg
 

Attachments

  • EAB5486B-D1C8-4A2E-97E1-103A8E27B965.jpeg
    EAB5486B-D1C8-4A2E-97E1-103A8E27B965.jpeg
    342.8 KB · Views: 35
  • 0CAD69E9-7B95-49C6-96DE-71AED1573218.jpeg
    0CAD69E9-7B95-49C6-96DE-71AED1573218.jpeg
    358.6 KB · Views: 33
I have had way worse,,,you can clean up the edges with a cold flat file,,,do not file outer edges that contact thebwear ring,,,the wear ring does not look that bad,,give it a go.
 
If it was me and go to all the trouble of getting the pump out
if i have the money !! I would replaced ofcourse alone with the wear ring
 
Change the impeller. The vibration will kill the pump bearings then ruin the whole pump and seals for the driveshaft and crank will suffer.
 
Status
Not open for further replies.
Back
Top