diy flash spark ecu:

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
seadoo spark ecu bench harness.

can be fitted with obd2 connector instead or as shown with brp>obd2 adapter.

can be used to flash spark ecu on bench with proper tool (as shown in picture) or very useful for candboo/BUDS tool access outside of ski as well.


21.jpg



22.jpg



23.jpg
 
seadoo spark ecu bench harness.

can be fitted with obd2 connector instead or as shown with brp>obd2 adapter.

can be used to flash spark ecu on bench with proper tool (as shown in picture) or very useful for candboo/BUDS tool access outside of ski as well.


21.jpg



22.jpg



23.jpg

You selling the harnesses Ian?
 
I got the brp 6 pin > obd2
Can i connect that to a standard OBD2 scanner?

2 x 2016 sparks. One has ibr and trim, other does not.
The one with ibr and trim says Check Engine and won't go over 25
I tried swapping the head units...bad idea. Now the other one won't start!
Need to check/reset codes. I'm in the bahamas on a small island so no dealers.
Please help! I don't want to fry any computers. Maybe time to invest in a CanDoo??
 
Back
Top