jerseydave
New Member
Hi guys, new member here.
So we purchased a very clean 2004 3D this summer, it only has 4 hours on it. (Dealer verified that)
Ok it ran well for 5 minutes but the check engine light was flashing and then it starting losing power, barely got back to the dock.
Limp home mode perhaps?
Dealer checked codes and said it looks like the crank speed sensor is the problem. He said part no longer available so I found a used one online and I put that in. Spark plugs changed also. Still no better.
Anyone know where to look next? We’re not feeling good about the lack of parts availability for this model and want to get it running right so we can resell it, just don’t want to stick anyone with a machine that’s not perfect (even though we got stuck with it by the previous owner)
Thanks in advance for your help
So we purchased a very clean 2004 3D this summer, it only has 4 hours on it. (Dealer verified that)
Ok it ran well for 5 minutes but the check engine light was flashing and then it starting losing power, barely got back to the dock.
Limp home mode perhaps?
Dealer checked codes and said it looks like the crank speed sensor is the problem. He said part no longer available so I found a used one online and I put that in. Spark plugs changed also. Still no better.
Anyone know where to look next? We’re not feeling good about the lack of parts availability for this model and want to get it running right so we can resell it, just don’t want to stick anyone with a machine that’s not perfect (even though we got stuck with it by the previous owner)
Thanks in advance for your help