So I took out my carbs to clean them and to replace fuel lines.  This is my first time doing such a procedure on one of these.  I went to put the carbs back on and realized that I have only three spots on the carb available to hook up hoses and I have four hose ends to fill.  So there are 3 towards the front of the ski the biggest one underneath I am guessing takes the biggest hose off the tank then there is one marked pulse and one on top of the carbs pointing straight towards the front of the ski.  And I have a piece of fuel line that is about 12 inches long that seemed to run between the carbs.  I did not take off any of the small lines and one real short piece of the bigger fuel line. can someone give me a picture or just tell me what to plug into what . I feel stupid.  thanks :banghead:
				
			 
	


 
 
		 
 
		 
 
		 
 
		