'99 GTi Ran Great, won't start now

[rj.gordon]

My '99 GTi Seadoo was running great. I was the last one to ride it. Put it on the trailer, 2 weeks later it won't crank. I have determined that the engine won't turn over and the starter is good. Is there such thing as a sticky piston??? I am going to Korea and need to sell these within the next couple of months. HELP!!!:ack:

 

[timmyboy76]

remove the plugs and remove the grey shield fro mback of motor..now turn the white disc look'n thing, to see if it'll turn, if not, then unbolt the steering cable from nozzle, undo the reverse bucket bolt/springs and undo the vts cable(if applicable), THEN REMOVE THE 4-17MM NUTS THAT SECURE THE PUMP TO HULL, AND PULL..THE ENTIRE UNIT WILL POP OUT..10MIN JOB, SLICK. then try to turn pto(white round disc) behind motor again. Sometimes a seized pump will indicate a seized motor...sorry for caps.