• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

98 xp limited

Status
Not open for further replies.

Opie

New Member
When I put lanyard on post i don't get the beeps that you should. How do I get the handlebar pad off to get to the buzzer? Thanks in advance
 
You may have corrosive film in lanyard cap, use a pencil eraser to clean it & post.
Ground the temp sensor cap wire to a clean headbolt, it should buzz. (lanyard on)
You can buy a buzzer at radio shack for ten buks and mount it under consol, tap
onto the buzzer wire that goes up the steering column.
 
Status
Not open for further replies.
Back
Top