97 Seadoo GS No start

[buckskintowing]

I have a 97 Seadoo GS. The previous owner installed a new module because it was blowing fuses. Now the unit powers on for a second when the tether is installed. When you push the start button it would beep just once. Well this morning I tried it again and it powers on for a second but does not beep anymore. I am new at these forums and jetskis. So any help would be great. Thanks.

 

[kustomkarl]

Welcome to the seadoo forum BST. Be sure the battery is good and charged up. Have it Load tested at like Auto Zone for free, if your in doubt of its conidition. Be sure the battery wires are in good shape and getting a good connection. The ground wire to the starter area should also getting a good clean connection. If the battery or wires are not in good shape it won't beep 2 times as needed or even start.

Karl