my seadoo took on a lot of water did everthing that i saw here and now it wont turn over at all... i removed the spark plugs turned it over until all water was removed fogged it ,the put a little oil down in the cylinders.Try to start it didnt fire. Let it sit to charge the battery over night now nothing is happening
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
97 gtx 787 engine problem
- Thread starter ralong30
- Start date
- Status
Dr Honda
Well-Known Member
If it took on a lot of water... you may need to check your electrical box for water. Also, you starter may be half full of water.
With the battery charged up... jump the two big terminals on the solenoid to see if the starter will spin the engine. If it will... then go over all the electrical connections. If it won't, pop the starter out, and check the brushes, and power wires going to it.
With the battery charged up... jump the two big terminals on the solenoid to see if the starter will spin the engine. If it will... then go over all the electrical connections. If it won't, pop the starter out, and check the brushes, and power wires going to it.
- Status
