• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

97 GTI no start no beep

Status
Not open for further replies.

Coreyacr

Member
Okay guys I have a 97 GTI with no start no beep no gauge light up tried 5 Start press nothing tested my beeper it's okay all fuses in the mpem good and show power fuse by solenoid good have power on both sides of fuse purchased used dess post steel nothing I am lost need help
 
Do your gauges come alive when you press the start button with key off post?

Sounds like you're getting power to the mpem at the fuses? Check the mpem ground. The mpem grounds through the MAG connection. Check that plug for corrosion if you have no ground
 
Do your gauges come alive when you press the start button with key off post?

Sounds like you're getting power to the mpem at the fuses? Check the mpem ground. The mpem grounds through the MAG connection. Check that plug for corrosion if you have no ground
No my gauges don't light up . And ok i will check
 
Where is the MAG connection that you speak of that might have corrosion as I'm experiencing something similar?
 
Status
Not open for further replies.
Back
Top