96 xp cool wiring diagram

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

Rosie2514

Active Member
Changed the starter relay in the Xp and now don't get anything .. No beeps .
Thought all wires were correct guess not .. Anyone have a picture of their box ? It would be appreciated
 
Check and see if you put the fuse terminal on the wrong post of the solenoid, that is the most likely issue.
I believe I have it on the right one . It is not getting any voltage at any times though . I'm thinking maybe the mpem is not getting power ? Any clu let where to test that ?
 
Connect the small ground wire to the battery?

Did you disturb the group of ground wires in the box?

And yeah the red power wire has to be on the hot side of the solenoid.
 
Here you go. The little red wires are on the side of the solenoid that goes to the battery.

****Your's might be on the other side. I think I swapped mine to make the wiring cleaner looking instead of having the wires crossed inside the box


462.jpg
 
I feel like an idiot .. Wfo you were right , fuse was on the wrong terminal .
Racer appreciate the picture for future reference !
 
Status
Not open for further replies.
Back
Top