I've had issues with this ski since I got it but it has gotten worse lately. I did much troubleshooting of the electrical about a year ago so I've been around this thing before. I am not getting power to the Yellow/Red wire that goes to the ignition coil. When I put 12 volts on it, the stater turns over. When I test the yellow/red wire for resistance to ground I get around 5.3 Ohms. I traced this down and found that on the solenoid I have 5.3 ohms resistance where the yellow/red wire connects. I am wondering of the solenoid is causing problems. It's either that or the MPEM. I've tried everything else... I think. LOL
Rectifier, CDI (replaced with spare, no change), Holder Relay (checked operation) Start/Stop switch is functioning. I have a spare MPEM but I'll have trouble identifying the key. LOL I'm actually just starting to get to the nitty gritty on this thing....
Previously I'd have to remove and reinsert the DESS Key and try it a few times. lately it has gotten a little ornery but always started and ran well. Sunday It started and quit.... No Fire I suppose so I reinserted the DESS Key and it started right up. We rode for about 40 minutes. Today... it started for a second and quit. I've been working on it... the starter will not turn over.
I have learned to listen to the Holder Relay pull in when I insert the DESS Key. When that happens I know the ski is gonna start up. Today I verified the Holder clicking but the ski will not turn over. That is all the info I have. I think the problem is in the MPEM. Help or input is appreciated
Note: I recently sent the MPEM off to have the keys set up and got a new key as well. I paid to have the MPEM checked out but there is only so much they can do to check things.
Rectifier, CDI (replaced with spare, no change), Holder Relay (checked operation) Start/Stop switch is functioning. I have a spare MPEM but I'll have trouble identifying the key. LOL I'm actually just starting to get to the nitty gritty on this thing....
Previously I'd have to remove and reinsert the DESS Key and try it a few times. lately it has gotten a little ornery but always started and ran well. Sunday It started and quit.... No Fire I suppose so I reinserted the DESS Key and it started right up. We rode for about 40 minutes. Today... it started for a second and quit. I've been working on it... the starter will not turn over.
I have learned to listen to the Holder Relay pull in when I insert the DESS Key. When that happens I know the ski is gonna start up. Today I verified the Holder clicking but the ski will not turn over. That is all the info I have. I think the problem is in the MPEM. Help or input is appreciated
Note: I recently sent the MPEM off to have the keys set up and got a new key as well. I paid to have the MPEM checked out but there is only so much they can do to check things.