951 gtx di rebuild

[KevBRP]

Hi i just finish rebuild my gtx di 2002 and i only have 130psi in each .... it is okay or it need to be higher than that .. sorry for my english

 

[jhjesse]

You are good. Should come up to about 140psi after break in and rings seat.

 

[KevBRP]

Do you know how much time i need to run the engine beafore the ring take is place ? And on the first run i put oil in gaz and the seadoo missfire it is normal for the first run

 

[mikidymac]

Drain the tank immediately! Never add oil to the tank on a DI ski as you will ruin the injectors and possible fuel pump.

These DI skis inject the fuel directly into the combustion chamber so the added oil won't lubricate anything anyways.

 

[KevBRP]

I have just put like 300ml in one entire tank should i drain the tank or its not enough to damage something

 

[jhjesse]

Drain the tank immediately! Never add oil to the tank on a DI ski as you will ruin the injectors and possible fuel pump.

These DI skis inject the fuel directly into the combustion chamber so the added oil won't lubricate anything anyways.

Yes drain the tank and replace with only gasoline. Bleed the oil injection if you have not already.
Break in period is usually 10 to 12 hours run time. Never hold wide open and vary the throttle so the engine is not constantly a the same rpms.

 

[jhjesse]

I have just put like 30ml in one entire tank should i drain the tank or its not enough to damage something

As far as the engine goes you should be fine. I would be concerned with clogging the injectors.

 

[KevBRP]

300ml not 30 sorry

 

[mikidymac]

Yes, drain and refill with fresh gas.

 

[KevBRP]

Ok thx guys appreciate your help