• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

951 carb question

Status
Not open for further replies.
Should the part be hard to blow through? The rest are really easy but this one has a smaller hole but still seems pretty hard to get air through. It's in the fuel pump side
 

Attachments

  • 15327274978427579213228246158659.jpg
    15327274978427579213228246158659.jpg
    1.9 MB · Views: 15
  • 15327275088738332172960892723931.jpg
    15327275088738332172960892723931.jpg
    1.9 MB · Views: 14
Return nipple pto carb. Has a hose that goes to a tee on the mag carb then to tank. Yes it has a restriction.
 
Last edited:
Should I be able to blow air into the these lines coming from acceltator pump. When on the ski they seemed to be working but I cant get any air through them
 

Attachments

  • 15327284765035263028119875994810.jpg
    15327284765035263028119875994810.jpg
    1.6 MB · Views: 8
Both of those should flow carb cleaner through them. It will not be a ton because they are metered orifices but they should still spray out cleaner.
 
Status
Not open for further replies.
Back
Top