95 XP 717 w/ Factory Pipe

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

Moto-Madness

New Member
So I just picked up a Factory Pipe but have yet to install it. Factiry Pipe tuning says to running 140/74 Jets. Does anybody have a 717 XP with the Factory Pipe on it and what do you run?

I am not going to run it with the Water Injection Module as of now just the pipe which Factory Pipe said was fine just loose a tiny bit of performance.
 
Use those sizes from the instructions. I also highly recommend you install a fuel pump on the rear carb so that you have dual fuel pumps. You should also make sure the engine is pressure tested for any air leaks before doing any modifications.

Chester
 
Status
Not open for further replies.
Back
Top