ggrimes13
Member
Just rebuilt top end, ran good on the hose, started it up 3 times for about 3-4 minutes each.  All seemed well until it just shut down, like I had pulled the lanyard or hit the stop...but I didn't.  Quick check of the basics showed no spark. 3 fuses in electrical box all good.  Anyone know what is the most likely part that would fail like this, and how to verify?  I have the shop manual and will read up on it, but wondering if anyone can give guidance from experience.
				
			 
	


 
 
		 
 
		 
 
		 
 
		 
 
		 
 
		